Universal Remote Control R7 - SPECS SHEET Instrukcja Użytkownika Strona 39
- Strona / 52
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Data Sheet ADP5589
Rev. B | Page 39 of 52
GPIO_DIRECTION_C Register 0x32
Table 58. GPIO_DIRECTION_C Bit Descriptions
Bits Name R/W Description
[7:3] Reserved.
2 GPIO_19_DIR R/W 0 = GPIO 19 is an input.
1 = GPIO 19 is an output.
1 GPIO_18_DIR R/W 0 = GPIO 18 is an input.
1 = GPIO 18 is an output.
0 GPIO_17_DIR R/W 0 = GPIO 17 is an input.
1 = GPIO 17 is an output.
UNLOCK1 Register 0x33
Table 59. UNLOCK1 Bit Descriptions
Bits Name R/W Description
7 UNLOCK1_STATE R/W Defines which state the first unlock event should be
For key events:
0 = not applicable; releases not used for unlock.
1 = press is used as unlock event.
For GPIs and logic outputs configured for FIFO updates:
0 = inactive event used as reset condition.
1 = active event used as reset condition.
[6:0] UNLOCK1[6:0] R/W Defines the first event that must be detected to unlock the keypad after LOCK_EN has been set.
UNLOCK2 Register 0x34
Table 60. UNLOCK2 Bit Descriptions
Bits Name R/W Description
7 UNLOCK2_STATE R/W Defines which state the second unlock event should be.
For key events:
0 = not applicable; releases not used for unlock.
1 = press is used as unlock event.
For GPIs and logic outputs configured for FIFO updates:
0 = inactive event used as reset condition.
1 = active event used as reset condition.
[6:0] UNLOCK2[6:0] R/W Defines the second event that must be detected to unlock the keypad after LOCK_EN has been set.
EXT_LOCK_EVENT Register 0x35
Table 61. EXT_LOCK_EVENT Bit Descriptions
Bits Name R/W Description
7 EXT_LOCK_STATE R/W Defines which state the lock event should be.
For key events:
0 = not applicable; releases not used for unlock.
1 = press is used as unlock event.
For GPIs and logic outputs configured for FIFO updates:
0 = inactive event used as reset condition.
1 = active event used as reset condition.
[6:0]
EXT_LOCK_EVENT[6:0]
R/W
Defines an event that can lock the keypad.
When this event is detected, LOCK_INT is set.
- ADP5589 1
- TABLE OF CONTENTS 2
- SPECIFICATIONS 3
- ABSOLUTE MAXIMUM RATINGS 5
- QUICK DEVICE OVERVIEW 7
- 9714-004 7
- DEVICE ENABLE 8
- DEVICE OVERVIEW 8
- EVENT FIFO 9
- KEY SCAN CONTROL 9
- Rev. B 10
- KEY PRESSED 10
- 09714-009 10
- Data Sheet ADP5589 11
- ADP5589 Data Sheet 12
- Key Pad Extension 12
- Ghosting 12
- FIFO Lock/Unlock 12
- GPI Input 15
- REGISTER INTERFACE 19
- REGISTER MAP 21
- ID Register 0x00 23
- INT_STATUS Register 0x01 23
- Status Register 0x02 23
- FIFO_1 Register 0x03 24
- Rev. B 25
- Rev. B 26
- GPI_INT_STAT_A Register 0x13 27
- GPI_INT_STAT_B Register 0x14 27
- GPI_INT_STAT_C Register 0x15 27
- GPI_STATUS_A Register 0x16 28
- GPI_STATUS_B Register 0x17 28
- GPI_STATUS_C Register 0x18 28
- RPULL_CONFIG_A Register 0x19 29
- RPULL_CONFIG_B Register 0x1A 29
- RPULL_CONFIG_C Register 0x1B 30
- RPULL_CONFIG_D Register 0x1C 30
- RPULL_CONFIG_E Register 0x1D 31
- GPI_EVENT_EN_A Register 0x21 32
- GPI_EVENT_EN_B Register 0x22 33
- GPI_EVENT_EN_C Register 0x23 33
- DEBOUNCE_DIS_A Register 0x27 35
- DEBOUNCE_DIS_B Register 0x28 35
- DEBOUNCE_DIS_C Register 0x29 36
- GPO_DATA_OUT_A Register 0x2A 36
- GPO_DATA_OUT_B Register 0x2B 36
- GPO_DATA_OUT_C Register 0x2C 37
- GPO_OUT_MODE_A Register 0x2D 37
- GPO_OUT_MODE_B Register 0x2E 37
- GPO_OUT_MODE_C Register 0x2F 38
- UNLOCK1 Register 0x33 39
- UNLOCK2 Register 0x34 39
- EXT_LOCK_EVENT Register 0x35 39
- UNLOCK_TIMERS Register 0x36 40
- LOCK_CFG Register 0x37 40
- RESET1_EVENT_A Register 0x38 40
- RESET1_EVENT_B Register 0x39 40
- RESET1_EVENT_C Register 0x3A 41
- RESET2_EVENT_A Register 0x3B 41
- RESET2_EVENT_B Register 0x3C 41
- RESET_CFG Register 0x3D 41
- PWM_OFFT_LOW Register 0x3E 42
- PWM_OFFT_HIGH Register 0x3F 42
- PWM_ONT_LOW Register 0x40 42
- PWM_ONT_HIGH Register 0x41 42
- PWM_CFG Register 0x42 42
- CLOCK_DIV_CFG Register 0x43 43
- LOGIC_1_CFG Register 0x44 43
- LOGIC_2_CFG Register 0x45 43
- LOGIC_FF_CFG Register 0x46 44
- POLL_TIME_CFG Register 0x48 44
- PIN_CONFIG_A Register 0x49 45
- PIN_CONFIG_B Register 0x4A 45
- PIN_CONFIG_C Register 0x4B 45
- PIN_CONFIG_D Register 0x4C 46
- GENERAL_CFG_B Register 0x4D 46
- INT_EN Register 0x4E 47
- APPLICATION DIAGRAM 48
- OUTLINE DIMENSIONS 49
Powiązane produkty i podręczniki dla Zdalne sterowanie Universal Remote Control R7 - SPECS SHEET
(52 strony)
(319 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.026 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji