Universal Remote Control ONE FOR ALL URC3220 Instrukcja Użytkownika Pobierz pdf (Strona 7)

PROGRAMMING FAVORITE CHANNEL SCAN

In the CBL/SAT or TV mode,you can store a list of up to 10 favorite channels,

in any order, that will be immediately scanned when FAV is pressed (see

Using Channel Scan

on the previous page).

NOTE: Favorite channels can only be programmed for one mode. After programming, if FAV

is pressed while in another mode, the remote control will start scanning all channels instead

(if applicable to the selected device).

1. On the remote control,press CBL/SAT or TV once.

2. Press and hold

SET until the LED (red light) blinks twice,

then release

SET.

3. Enter

9 - 9 - 6.The LED will blink twice.

4. Use the keypad to enter a favorite channel number (e.g.,

031). Then press SET once.

NOTE: If the original remote control required pressing an Enter key

to change the channel, also press the ENTER key after the channel

number (e.g., 0 - 3 - 1 - ENTER). On some satellite receivers and cable

boxes, you may need to press the SELECT (OK) key instead of ENTER.

5. If desired,repeat step 4 for each channel to be stored, up

to a total of 10 channels.

NOTE: If you try entering more than 10 channels,the remote control

will automatically exit programming. To change your favorite chan-

nel list at this point, you will first need to delete the existing list by

performing the steps in “Clearing Custom Programming”on page 14.

Then, perform the instructions in this section once again.

6. To exit programming with less than 10 favorite channels

stored,press and hold

SET until the LED blinks twice.

Otherwise, the remote control will automatically exit the

program after 10 channels have been stored.

CHANGING VOLUME LOCK

The One For All 3 Device Universal Remote Control is set at the factory for

independent volume control of each selected device.However, you may

change the Volume Lock setting to

Global Volume Lock

so that a device’s vol-

ume will be locked to one mode (e.g., to control TV volume in all other

modes).After that,if desired,you can perform

Individual Volume Unlock

a selected device to set its volume control for independent operation.

Locking Volume Control To One Mode

(Global Volume Lock)

1. Press and hold SET until the LED (red light) blinks twice,

then release

SET.

continued on next page...

11 12

PROGRAMMING A MASTER POWER MACRO

(cont’d)

Clearing The Master Power Macro

1. Press and hold SET until the LED (red light) blinks twice,

then release

SET.

2. Enter 9 - 9 - 5.The LED will blink twice.Then press POWER

once.

3. Press and hold

SET until the LED blinks twice, then release

SET.The

Master Power Macro

is now cleared.

RE-ASSIGNING DEVICE KEYS

The One For All 3 Device Universal Remote Control can be set to control a

DVD player and a VCR (or a PVR) or a second DVD player by re-assigning

the unused CBL/SAT key as follows:

1. On the remote control,press and hold

SET until the LED

(red light) blinks twice, then release SET.

2. Enter

9 - 9 - 2.The LED will blink twice.

3. Press

DVD/VCR once.

4. Press

CBL/SAT once. The LED will blink twice.The CBL/SAT key

is now ready to be set up to control your VCR (or PVR) or

second DVD player. See

Programming Device Control

on page

NOTE: Only one device can be assigned to an unused device key at a time.

USING CHANNEL SCAN

In the CBL/SAT or TV mode,use the FAV key to start a 3-second scan of all

channels.Or, if programmed, use the

FAV key to scan only your favorite

channels to view a desired channel (see

Programming Favorite Channel Scan

on next page. )

1. Press

CBL/SAT or TV once.

2. Press

FAV once.

•If

Favorite Channel Scan

has been set up, scanning of favorite

channels will start with up to 100 channel changes or until

stopped by pressing any key.

•If

Favorite Channel Scan

has not been set up, scanning

will start with the current channel, and continue up to

100 channel changes or until stopped by pressing any key.

3. To stop scanning channels at any time, press any key once.

WALRB3P manual booklet 5/2/06 3:13 PM Page 11

1 2 3 4 5 6 7 8 9

Komentarze do niniejszej Instrukcji

Brak uwag

Universal Remote Control ONE FOR ALL URC3220 Instrukcja Użytkownika Strona 7

Komentarze do niniejszej Instrukcji